#stage1
Unitronic Stage 1 : 700HP / 694LB-FT
Stock Power: 591HP / 590LB-FT
91 Octane/95 RON Gas
Description
Unitronic Stage 1 Performance software is precisely calibrated for use with 91 AKI / 95 RON fuel. Subject to ECU box code availability.
Stock power dyno figures are based on the higher rated DJPB engine found in the RS6/RS7. Final power output can be expected to remain the same.
UniConnect+
This vehicle has added support through UniCONNECT+ which allows you to program your own vehicle right in your own garage.
Features
-
Optimized Responsiveness, Smoothness, Drivability, and Comfort:
Unitronic’s ECU calibrations are engineered to improve engine response and reduce low-end lag. Unitronic’s Performance Software has gained worldwide recognition and is well known for its broad powerband, with smooth power delivery, maximizing responsiveness and “area under the curve”, under normal and hard acceleration.
-
Ignition Timing Precisely Calibrated for Higher Octane Fuel:
Engine calibration optimized to take advantage of higher fuel quality to extract maximum energy from the combustion. Therefore, when using a higher octane fuel, more power and better fuel efficiency will be achieved.
-
Optimized Maximum Output:
Unitronic’s ECU Calibrators deliver the maximum power output while staying within the operational limits of the factory engine and drivetrain components. Specifically, this results in the highest engine performance without sacrificing the reliability of the engine, turbocharger, or other engine and drivetrain components.
-
Factory Safety Limiters Retained:
OEM “fail safes” are retained within the ECU calibration. Close monitoring of all operation parameters ensures that engine operation stays within factory components limits, resulting in reliability.
-
Power Delivery Perfectly Optimized Throughout the Power Band:
Aligned with the OEM strategy, the calibration is designed to offer a large flat torque plateau to provide a smooth and linear power band. Maximum torque output is achieved sooner and maintained longer which creates a broader torque plateau and greater area under the curve. This results in an improved acceleration and optimal engine operation.
-
Speed Governor Removed:
Vehicle speed limiter within ECU is removed. (Subject to transmission rotational speed limit.)
-
Standing RPM (soft) limiter increased from 3k to 5k RPM:
Once the vehicle has reached FULL operating temperature, it can be revved to a maximum of 5k RPM in Park or Neutral. -
Improved Fuel Efficiency:
Optimized timing and injection in cruising condition allows for an improved fuel efficiency, under normalized driving conditions.
-
Engineered with Strict Industry Standards:
With over 10 years of experience with Bosch and Siemens engine management systems and calibrations, Unitronic is able to utilize its expertise, industry leading tools and equipment to ensure an optimal calibration; delivering maximum performance, while maintaining complete OEM-like reliability and drivability.
-
Extensively Tested Under Various Driving Conditions:
Development begins using Unitronic’s in-house Maha Chassis dyno housed in an environmentally controlled cell; closely monitoring a plethora of operational data, utilizing industry leading calibration tools and resources. Beta calibrations are then tested in street and track scenarios, using multiple cars under various driving conditions. This engine calibration strategy ensures Unitronic Performance Software delivers maximum performance, OEM-like drivability and reliability anywhere in the world. Unitronic Performance Software is only released to its Clients once development is thoroughly completed in accordance to Unitronic’s strict standards.
Related Hardware
- *An upgraded intake is recommended to achieve the advertised power figures.
#stage1plus
Unitronic Stage 1 Plus : 753HP / 709LB-FT
Stock Power: 591HP / 590LB-FT
93 Octane/ 98 RON Gas
Description
Unitronic Stage 1+ Performance software is precisely calibrated for use with 93 AKI / 98 RON fuel. Subject to ECU box code availability.
Stock power dyno figures are based on the higher rated DJPB engine found in the RS6/RS7. Final power output can be expected to remain the same.
UniConnect
This vehicle has added support through UniCONNECT+ which allows you to program your own vehicle right in your own garage.
Features
-
Optimized Responsiveness, Smoothness, Drivability, and Comfort:
Unitronic’s ECU calibrations are engineered to improve engine response and reduce low-end lag. Unitronic’s Performance Software has gained worldwide recognition and is well known for its broad powerband, with smooth power delivery, maximizing responsiveness and “area under the curve”, under normal and hard acceleration.
-
Ignition Timing Precisely Calibrated for Higher Octane Fuel:
Engine calibration optimized to take advantage of higher fuel quality to extract maximum energy from the combustion. Therefore, when using a higher octane fuel, more power and better fuel efficiency will be achieved.
-
Optimized Maximum Output:
Unitronic’s ECU Calibrators deliver the maximum power output while staying within the operational limits of the factory engine and drivetrain components. Specifically, this results in the highest engine performance without sacrificing the reliability of the engine, turbocharger, or other engine and drivetrain components.
-
Factory Safety Limiters Retained:
OEM “fail safes” are retained within the ECU calibration. Close monitoring of all operation parameters ensures that engine operation stays within factory components limits, resulting in reliability.
-
Power Delivery Perfectly Optimized Throughout the Power Band:
Aligned with the OEM strategy, the calibration is designed to offer a large flat torque plateau to provide a smooth and linear power band. Maximum torque output is achieved sooner and maintained longer which creates a broader torque plateau and greater area under the curve. This results in an improved acceleration and optimal engine operation.
-
Speed Governor Removed:
Vehicle speed limiter within ECU is removed. (Subject to transmission rotational speed limit.)
-
Standing RPM (soft) limiter increased from 3k to 5k RPM:
Once the vehicle has reached FULL operating temperature, it can be revved to a maximum of 5k RPM in Park or Neutral. -
Improved Fuel Efficiency:
Optimized timing and injection in cruising condition allows for an improved fuel efficiency, under normalized driving conditions.
-
Engineered with Strict Industry Standards:
With over 10 years of experience with Bosch and Siemens engine management systems and calibrations, Unitronic is able to utilize its expertise, industry leading tools and equipment to ensure an optimal calibration; delivering maximum performance, while maintaining complete OEM-like reliability and drivability.
-
Extensively Tested Under Various Driving Conditions:
Development begins using Unitronic’s in-house Maha Chassis dyno housed in an environmentally controlled cell; closely monitoring a plethora of operational data, utilizing industry leading calibration tools and resources. Beta calibrations are then tested in street and track scenarios, using multiple cars under various driving conditions. This engine calibration strategy ensures Unitronic Performance Software delivers maximum performance, OEM-like drivability and reliability anywhere in the world. Unitronic Performance Software is only released to its Clients once development is thoroughly completed in accordance to Unitronic’s strict standards.
Recommended Hardware*:
*An upgraded intake is recommended to achieve the advertised power figures.
728HP/699LB-FT max w/ Stock Intake
728HP/699LB-FT max w/ Stock Intake